HUBEI FUYA VEHICLE CO.,LTD
I. Details of I-SUZU 10m3 10CBM 10ton 10 cubic 10 ton swing roll on and off garbage truck
(1) Functions:
Skip loader garbage truck (also called swim arm truck, roll on and off garbage truck, refuse collection truck, refuse collection swing arm garbage truck,
rubbish truck, bin wagon, dustcart, bin lorry, waste collection vehicle) is designed to collect and transport municipal solid waste.
The skip loader garbage truck can be used in urban erea and suburb.The container on the rear of the truck can be put down on the ground to gather
garbage at a fixed location .when the container gathers full.the truck lift it on the flat bed on the rear of the truck.then dump the garbage in the garbage center.
The operation system could be manual or electrical control.
(1) More than 12 years professional manufacturer experience.
(2) CCC ISO9001 agreement
(3) Be designed according to your requirements
(4) Small order can be accepted
(5) We accept 100% inspection, welcome to our factory at any time
(6) 12 month quality guarantee term
We can offer 4x2, 6x4, 8x4, Dongfeng, Sinotruck, FOTON, SHACAN, FAW, CAMC, JMC, JAC with 3m3 to 20m3 garbage compactor trucks.
II. Specification of Japan I-SUZU 8CBM 10000Liters Swim Arm Refuse Collection Vehicle Skip Loader Garbage Truck
| Main specification |
Chassis brand |
/ |
I-SUZU |
| Overall dimension(L*W*H) |
mm |
7500x2500x 3250 |
| Total weight |
kg |
16,000 |
| Rated Loading capacity |
kg |
10000 |
| Chassis |
Drive modle |
/ |
4x2 left hand drive |
| Axle number |
/ |
2 |
| Axle loading (front/rear) |
kg |
2000/4600 |
| Wheel Base |
mm |
4500 |
| Front/rear suspension |
mm |
1,430/2,120 |
| Front/rear track |
mm |
1,940/1,860 |
| Spring number |
/ |
9/12+10 |
| Tyre size & number |
/ |
9.00-20 |
| Max speed |
km/h |
90 |
| Engine |
Manufacturer |
/ |
i-suzu |
| Model |
/ |
4JB |
| Engine Type |
/ |
Diesel, 4 cylinder |
| Horse power |
kw/hp |
240 |
| Displacement |
ml |
5790 |
| Emission |
/ |
Euro 5 |
| Garbage box |
Box volume |
m3 |
10m3-15m3 |
| Box Material |
/ |
carbon steel, side 3mm, bottom 4mm, |
| Standard configuration |
/ |
one Garbage box without cover,Two balancing valve, oil cylinder |
III. Details and operation of China skip loader /roll on and Roll off Garbage Truck
Load operation is less than 30 seconds, unloading operation time is less than 45 seconds;
Can choose 240L(single bin,double bins)or 360L,660L,1100L standard bin lifting and turnover mechanism,can also choose ground
hopper and other kinds of loading mechanism.
Automatic control-- The hydraulic control operation system can be controlled by electric and manual, one operation system button
installed in the cab, the other operation system button installed at the back of the upper body.
IV. SKIP LOADER GARBAGE TRUCK OPERATION
IV. Production workshop
There are more than 500 workers in our factory. Every production details are strictly controlled by our technicial engineers and production manager.
V. PRODUCT SHIPPING (RORO OR BULK SHIP OR CONTAINER)
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.
CONTAINER: The truck is put into the container. This model is used for small model trucks
VII. ABOUT US
HUBEI FUYA VEHICLE CO.,LTD is an authorized special truck manufacturer which has many years in design ,product ,sales and service in special trucks like as boom truck , fire truck, manlift truck, tank truck , garbage truck, tipper truck , wrecker truck , refrigerated truck and etc. Main info as below:
Five characteristic:
1) High pressure dredging: large flow of high pressure water to burst through the blocked pipe, and flush the sludge to the mouth of the well. Using different nozzles can solve corresponding dredging problem in different working situation. Visible nozzle can test pipe while dredging.
2) Vacuum suction: roots vacuum pump with strong suction ability, suction hose can be put into the bottom of the well to suck the sludge. Suction is above 15m.
3) Sludge recycling: introduce from Europe new purification technology to purify sludge, then us purified water to dredge pipe, thus save energy, save time, enhance the working efficiency.
4) Separate mud from water: traditional combi jetting truck dewater the sludge by means of rosebox, this truck adopts screw extrusion of mud water separation device to separate mud from water, which has two advantages:reuse the water and save the space of sludge discharging.
5) Screw discharge: use advanced screw discharge, dewatered sludge can be transported by low cost sewage truck.
Six advantages:
1) high quality sewer hose.
2) servo sewer hose reel, servo close control.
3) Titanium ceramic nozzle, patent high pressure jetting technology, cleaning nozzle.
4) Conroller Area Network, intelligent control, 32 humanization design.
5) Stainless steel shell.
6) Dredging, suction, sewage recycling and screw extrusion can be operated simultaneously.
Company Information
ClW Heavy Industry Co., Ltd which is appointed by Ministry of Industry and Information Technology of China, is a manufacturer producing all kinds of special trucks and semi-trailer.
We serve the best service for each client.
Our main products:
1. Dump Truck / Tipper Truck
2. Fire Fighting Truck / Fire Truck / Fire Vehicle / Fire Engine
3. Truck with crane / Truck mounted crane
4. Oil Tank Truck / Fuel Tanker Truck
5. Water truck / Water Tank Truck / Water Sprinkler Truck
6. Concrete Mixer Truck
7. Van truck / Insulated truck/ Refrigeration truck
8. Fecal suction truck / Sewage suction truck,
9. Cement Powder Tank truck/ Bulk cement truck
10. High-altitude operation truck,
11. Self-loading garbage truck, garbage compactor truck, sealed garbage truck,
12. Semi Trailer ( flat bed trailer / skeleton trailer / dump semi trailer / side wall trailer / low bed trailer / van container trailer / warehouse trailer, etc. )
Exporting
As Manufacturer, We Have Our Own License Of Import And Export.We Have Successfully Exported To Ghana, Sudan, Nigeria, Angola ,Tajikistan, Namibia, Burma, Korea, Iran,American,Afghanistan,Iraq And Some Other Countries.The Development Of Our Factory Is Getting Better And Better.
After Sales Service
Answer and solve your questions and consult within 24 hours
Overseas job site service available
One year guarantee about three key parts(axle, engine, transmission).Other spare parts could be supplied by cost price.
Other services:
1.All trucks and trailers are new and be customized to meet all your requirement.
2. All trucks and trailers are with 12 months quality guarantee.
3. CKD and SKD are available.
4. Technical support are provided.
FAQ
1.Our price term: FOB Shanghai as common, other port is also acceptable.
2. Our Payment term: T/T, 30% deposit after order confirmation, 70% balance should be paid before delivery.
3. Delivery time: the delivery time is 20-30 days as common, the exact delivery time depends on the order and the current production condition.
If you are interested in our trucks, pls contact me, I will send our best quotation to you.
Audited Supplier 
){kind=link}