| Customization: | Available |
|---|---|
| After-sales Service: | 24hours on-Line Service |
| Warranty: | 12months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Specification | |||
| Model | ISUZ 3ton Tow Truck with 3ton Stright Boom Crane Cabin with AC |
||
| Vehicle Main Dimensions | (L x W x H)mm | 6440*2480*3000 | |
| Wheel base (mm) | 3360 | ||
| Approch/Departure angle | 27/20 | ||
| Front/Rear overhang(mm) | 1440/3000 | ||
| Weight in KGS | Curb Weight | 4000 | |
| Loading weight | 5000 | ||
| Max. driving speed(km/h) | 90 | ||
| Engine | Brand | ISUZ | |
| Model | |||
| Type | 4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling | ||
| Horse Power(HP) | 98 | ||
| Max. Displacement | 5900ml | ||
| Max. Output Power | 140kw | ||
| Max. Torque | 640N.m | ||
| Rotated Speed | 1500rpm | ||
| Emission standard | Euro 4 | ||
| Gearbox | 6 forwards& 1 reverse | ||
| Fuel Tank | 100L | ||
| Clutch | Reinforced diaphragm clutch, diameter 430mm | ||
| Tire | 7.00R16 7pc including 1 spare tire | ||
| Brakes | Service brake: dual circuit compressed air brake Parking brake:(emergency brake): spring energy, compressed air operating on rear wheels Auxiliary brake: engine exhaust valve brake with ABS brake | ||
| Steering Gear | power steering, hydraulic steering with power assistance | ||
| Main structure and working principle of flat bed one tow two wrecker | |
| I. Power take off device The power take-off device of flat bed one towing two wrekcer truck is composed of oil pump, power take-off device and flexible shaft cable. It is used to output automobile power to the oil pump and become hydraulic energy. Through the action of the handle installed in the truck cabin, the power take-off gear is connected or separated with the power take-off output gear in the car gearbox through the flexible shaft cable, so as to make the oil pump work or stop. Note: when the truck is running, the power take-off tooth in the power take-off should be disconnected, and the oil pump does not work. |
|
| II.Hydraulic transmission mechanism After the power take-off of the flat bed truck is engaged, the oil pump works and the high-pressure oil enters the multi-way directional valve. Various actions can be carried out by controlling different handles on the directional valve. |
|
| III. Traction system High pressure oil drives hydraulic motor to drive winch. When the hydraulic motor works, the handle of the control valve is in the "put" position, and the steel wire rope can be automatically put out. Pull the handle of the control valve to the "put" position, and the vehicle can be towed or the steel wire rope can be put back. Note: when the vehicle is running normally, the wire rope hook should be tightly hung on the ring hole at the end of the flat plate. Flat one tow two wrecker using tires |
|
| IV. Lifting device The bracket is divided into front bracket and rear bracket. The front bracket is sheathed at both ends of the swing arm and fixed with a spring pin. The rear bracket is inserted into the square hole of the front bracket and fixed with a pin. At the same time, the tire is locked with a fastening pull lock. |
){kind=link}